OUR PRODUCTS

OUR DIFFERENT PRODUCTS

As the quality of the finished products is largely dependent on the quality of the raw material, we put a lot of effort into the supply of FDT (Coagulum).

In order to accelerate the maturation and improve the physical properties of the rubber, we have a pre-washing station equipped with a slab cutter and a creper.

SAN10 (TSR10)

This Product is the equivalent of the TSR10 Standard.

#CHARACTERISTICSLIMITSTEST METHODS
1Wallace-PO plasticity≥ 30ISO 2007
2PRI en %[50,54]ISO 2930
3Mooney VR viscosityNAISO 289-1
4Impurity in %≤ 0.08ISO 249
5Ash in%≤ 0.75ISO 247
6Volatile matter in%≤ 0.8ISO 248
7Nitrogen in %≤ 0.6ISO 1656

(TSR 10 - Tropicore)

This product is the equivalent of a TSR10 with the specificity of PRI> = 55.

#CHARACTERISTICSLIMITSTEST METHODS
1Wallace-PO plasticity≥ 30ISO 2007
2PRI en %≥ [55]ISO 2930
3Mooney VR viscosityNAISO 289-1
4Impurity in %≤ 0.08ISO 249
5Ash in%≤ 0.75ISO 247
6Volatile matter in%≤ 0.8ISO 248
7Nitrogen in %≤ 0.6ISO 1656

NATURAL PELLET RUBBER IS THE MOST Widespread and USED.

It is produced in tropical countries whose climate is characterized by very high annual precipitation combined with heat. The producing countries of this material are concentrated in Southeast Asia, although its origin is in South America.

Rubber in the raw state (not dried) has properties of little industrial interest.